What diesel mechanics need from their software, from sources outside Jobber and outside Nexa:
Jobber covers the billing and field side of diesel work well. It has a mobile app for field teams, so roadside and on-site jobs can be quoted and invoiced where the truck is, with online payments. Its Connect plan adds automated client reminders, checklists, and invoice follow-ups. Those are the closest thing either tool offers to annual-inspection due-date nudges and a repeatable inspection checklist. It also has QuickBooks Online integration, route optimization, and an app marketplace. Jobber is built for home services, though, and has no per-vehicle inspection report with inspector, carrier, components, and certification. It has no 14-month retention schedule and no record of VIN, gross weight, or fleet affiliation. Shops would have to improvise all of that with custom notes and checklists. The reminders and checklists also sit on a higher plan than the $49 Core plan.
Nexa covers invoicing, estimates, jobs with costing and profit per job, recurring jobs, a client pay portal through the shop's own Stripe account, a CRM with notes and tags, time tracking, and a full set of bookkeeping tools. It also works offline. Those could hold work-order notes and bill mobile calls. But Nexa has no inspection templates, no job templates, and no certification workflow. Its client record has no street-address field, so a carrier's address has no proper place. It has no QuickBooks or Xero sync, no SMS, and no route optimization or dispatch. Its automated emails, including reminders, send only while Nexa is open on one of your devices, so unattended annual-inspection reminders are unreliable. It is also software you run yourself, with no hosted support desk or vendor-run onboarding.
Over three years, Jobber's Core plan is $49 a month, $588 a year, or $1,764 in total, and the plans with reminders and checklists cost more. Nexa is $279 once, or $458.64 over three years if you add Cloud Sync at $4.99 a month. Nexa is far cheaper, but it lacks the automated reminders, the mobile field workflow, and the accounting sync a shop already using Jobber may rely on. A shop on Jobber should stay and keep inspection records in a dedicated fleet maintenance and inspection records tool. A shop with no field crew and simple needs, using one device, could try Nexa for the savings.
Our read for diesel mechanics: Stay with Jobber for its mobile field app, reminders, and QuickBooks sync, and keep per-vehicle DOT inspection records in a dedicated inspection-records tool, because Nexa lacks those same pieces and neither stores inspection reports.
Read on each linked page in October 2026. Check them again before you decide; vendors change plans often.
Jobber costs diesel mechanics $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so after 5.7 months it has cost less than Jobber, and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
Nexa is $279 once, about $23 a month over its first year. Its Drain Guard reads your expenses (from a linked bank, an imported statement, or ones you type in), finds the charges that repeat, and adds them up by the month. Keep or Cut then walks you through them one at a time. Cancel $23 a month of charges you'd forgotten about and Nexa has paid for itself inside the first year, before you count the Jobber bill you'd stop paying.
It depends on what you find and what you cancel, so we don't promise a number. In our demo data, Drain Guard finds 5 subscriptions adding up to $110.13 a month. That is sample data, not a customer's.
The verdict for diesel mechanics: Stay with Jobber if the needs in our read above apply to you. If they don't, Nexa covers the core invoicing, scheduling and books for $279 once against $1,764 for Jobber over three years.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
| Feature | Jobber | Nexa |
|---|---|---|
| Invoicing | ✓ | ✓ |
| Scheduling | ✓ | ✓ |
| CRM | ✓ | ✓ |
| Time Tracking | — | ✓ |
| Full Accounting | — | ✓ (SIMPL) |
| Task Management | — | ✓ |
| Works offline | — | ✓ |
| Price | $49/mo | $279 once or 3 × $99 |
| 3-Year Total | $1,764 | $279 |
| You own it? | No — stop paying, lose access | Yes — forever |
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Jobber is built for home and commercial field service businesses. Its homepage names 12 trades, including cleaning, HVAC, landscaping, plumbing, roofing and tree care, and says it serves service pros in over 50 industries. (getjobber.com)
Read on each linked page in October 2026. Check them again before you decide; vendors change plans often.
Software doesn't do the actual work — it automates the business around it. And that part is the same for every diesel mechanic: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Jobber plus whatever else you're paying for:
Email yourself this comparison?
The median diesel mechanic earns $55,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for diesel mechanics. You own it like you own your heavy-duty diagnostic scanner with J1939 and OEM software.
An honest fit check — because the wrong tool is worse than no tool.
The honest fit: if you're a solo or small diesel mechanics business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
Extreme summer heat drives HVAC demand. Hurricane risk on Gulf Coast. Year-round construction. Rapid population growth in DFW, Austin, Houston, San Antonio creates sustained demand. Freeze events (like 2021) create emergency plumbing/HVAC surge.
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
A diesel mechanic's bay is loud, greasy, and rarely on schedule. The day usually opens with a truck towed in dead or a fleet driver describing a derate, a check-engine lamp, or a sudden loss of power. The first move is the scanner, pulling J1939 and OEM codes that point toward fuel, emissions, or sensors, but codes only narrow the search; the real diagnosis happens with a wrench and a trained ear. Mornings might mean an injector cutout test, checking fuel rail pressure, or measuring blowby to judge whether an engine is tired. Emissions work eats a huge share of the day now: clogged DPFs, failed EGR coolers, DEF dosing faults, and forced regens that have to be documented for DOT. Big jobs like an in-frame overhaul or a head replacement demand torque specs followed exactly, because a missed sequence costs a head gasket and a tow back. Between jobs there are fleet managers calling for status, parts that show up wrong, and a constant pressure to get trucks back on the road because every idle hour is money the customer isn't earning. The headache that lingers isn't the diagnosis; it's keeping each truck's history straight so nobody pays twice for the same EGR cooler, and so the invoice reflects every hour actually turned.
Real diesel mechanics near you who run their business on Nexa — book directly, no platform fee. Are you a diesel mechanic? Post your business and get found in your area — $2.99 one-time. Or browse every diesel mechanic on Nexa →
The tools of the trade — each a one-time buy that earns its keep for years.
Here's the bar that matters: you spent $2,200–$10,200 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
We build a diesel mechanic's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a diesel mechanic — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
For solo diesel mechanics and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo diesel mechanics, these aren't dealbreakers.
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
Own your tools. Stop renting your software.
Get Nexa — $279 Once