What forestry mulchers need from their software, from sources outside Jobber and outside Nexa:
Jobber covers the office side of mulching work well. It has quotes, invoices with online payments, scheduling, a mobile app for the field, and a Jobber AI that drafts quotes and adds line items. Line items are what a mulching invoice needs when it separates mulching time, transport and crew travel. Jobber does not list per-acre or per-hour quote types, minimum billable hours, or tracking of fuel and cutter wear per machine hour. The $49 plan also leaves out the parts closest to those costs. Time and expense tracking comes with the Connect plan, and job costing with the Grow plan. A mulching contractor who wants costs tied to each job would likely need a higher plan than the one priced here.
Nexa has quotes and estimates that convert to invoices, so you can write per-acre or hourly pricing and add separate lines for mulching, hauling and travel. It also has expenses, time tracking, and jobs with costing and profit per job. You could log fuel, diesel exhaust fluid and replacement teeth against a job, though Nexa has no per-machine-hour tracking. It works offline, which suits remote sites. Nexa does not sync with QuickBooks or Xero, has no text messaging, no route optimization or dispatch board, no app marketplace, and no hosted support desk. Its automated emails send only while Nexa is open on one of your devices. Online card payments go only through your own Stripe account.
Over three years, Jobber's $49 plan costs $1,764 ($588 a year). Nexa costs $279 once, or $458.64 if you add Cloud Sync at $4.99 a month to use more than one device. If you run a small operation, price by the acre or hour, and want job costing and expense tracking without a monthly bill, Nexa fits and costs much less. Stay with Jobber if you depend on QuickBooks Online sync, text messaging, route optimization, or vendor support. Also stay if you want automated reminders that run without your own device open.
Our read for forestry mulchers: Nexa costs far less over three years and covers quoting, costing and expenses for mulching; stay with Jobber if you need QuickBooks sync, texting, routing or vendor support.
Read on each linked page in October 2026. Check them again before you decide; vendors change plans often.
Jobber costs forestry mulchers $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so after 5.7 months it has cost less than Jobber, and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
Nexa is $279 once, about $23 a month over its first year. Its Drain Guard reads your expenses (from a linked bank, an imported statement, or ones you type in), finds the charges that repeat, and adds them up by the month. Keep or Cut then walks you through them one at a time. Cancel $23 a month of charges you'd forgotten about and Nexa has paid for itself inside the first year, before you count the Jobber bill you'd stop paying.
It depends on what you find and what you cancel, so we don't promise a number. In our demo data, Drain Guard finds 5 subscriptions adding up to $110.13 a month. That is sample data, not a customer's.
The verdict for forestry mulchers: Either can do the job, for the reasons in our read above. On price alone, that is $279 once against $1,764 for Jobber over three years.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
| Feature | Jobber | Nexa |
|---|---|---|
| Invoicing | ✓ | ✓ |
| Scheduling | ✓ | ✓ |
| CRM | ✓ | ✓ |
| Time Tracking | — | ✓ |
| Full Accounting | — | ✓ (SIMPL) |
| Task Management | — | ✓ |
| Works offline | — | ✓ |
| Price | $49/mo | $279 once or 3 × $99 |
| 3-Year Total | $1,764 | $279 |
| You own it? | No — stop paying, lose access | Yes — forever |
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Jobber is built for home and commercial field service businesses. Its homepage names 12 trades, including cleaning, HVAC, landscaping, plumbing, roofing and tree care, and says it serves service pros in over 50 industries. (getjobber.com)
Read on each linked page in October 2026. Check them again before you decide; vendors change plans often.
Software doesn't do the actual work — it automates the business around it. And that part is the same for every forestry mulcher: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Jobber plus whatever else you're paying for:
Email yourself this comparison?
The median Forestry Mulcher earns $55,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for forestry mulchers. You own it like you own your Track skid-steer or excavator with a forestry mulching head.
An honest fit check — because the wrong tool is worse than no tool.
The honest fit: if you're a solo or small forestry mulchers business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
Extreme summer heat drives HVAC demand. Hurricane risk on Gulf Coast. Year-round construction. Rapid population growth in DFW, Austin, Houston, San Antonio creates sustained demand. Freeze events (like 2021) create emergency plumbing/HVAC surge.
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
Forestry mulching is one machine doing what used to take a dozer, a chipper, and a burn pile, grinding standing brush and small trees into a layer of chips right where they stand, but the catch is that the mulching head is a hydraulic monster that drinks fuel and flow by the hour, so I bill by the hour or the acre and not by some flat lawn-mowing number people imagine. Before I quote I have to scope the actual stem diameter, because a head rated for six-inch material will choke and overheat trying to chew an eight-inch trunk, and density matters as much as size: a thin understory flies, but a wall of cedar or privet crawls. The teeth are the heartbeat and the heartbreak of the job, a consumable that I sharpen and swap constantly, and the thing that ruins a day is a hidden rock, an old strand of fence wire, or a buried T-post that shatters a set of knives and parks me for repairs. The expectation talk is constant, because customers confuse mulching with clearing and picture bare graded dirt, when what I actually leave is the stumps in the ground and a clean carpet of chips that suppresses regrowth. I flag the treatment boundary, grease the head at every break, run the carrier carefully on slopes, and track engine hours because that's the real meter on this work.
Real forestry mulchers near you who run their business on Nexa — book directly, no platform fee. Are you a forestry mulcher? Post your business and get found in your area — $2.99 one-time. Or browse every forestry mulcher on Nexa →
The tools of the trade — each a one-time buy that earns its keep for years.
Here's the bar that matters: you spent $61,660–$202,300 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
We build a forestry mulcher's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a forestry mulcher — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
For solo forestry mulchers and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo forestry mulchers, these aren't dealbreakers.
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
Own your tools. Stop renting your software.
Get Nexa — $279 Once